The Globe and Mail

Go to the Globe and Mail homepage

Jump to main navigationJump to main content

Globe Investor

News Sources

Take control of your investments with the latest investing news and analysis

Press release from Business Wire

Introducing the 3M Adjustable Composite Positioning System 11095

<p class='bwalignc'> <i>Unique positioning spray integrates during infusion process</i> </p>

Wednesday, May 16, 2012

Introducing the 3M Adjustable Composite Positioning System 1109511:40 EDT Wednesday, May 16, 2012 ST. PAUL, Minn. (Business Wire) -- 3M introduces the new 3M™ Adjustable Composite Positioning System (ACPS) 11095, an easy-to-use positioning spray designed for pre-infusion resin bond dry reinforcements and composite matrices. The unique properties of 3M ACPS 11095 enable it to integrate into the part during resin infusion, eliminating read-through and transition layers in the part post-cure. This patent-pending system offers manufacturers benefits in productivity, esthetics and flexibility. 3M ACPS 11095 is uniquely formulated to be compatible with most resin systems, including polyester, vinyl ester and epoxy resins. It goes down easily on both flat and curved mold designs, and after spraying, the product builds tack within seconds and is tack-free in two to three minutes. Designed with ease-of-use in mind, the product features a unique color change system that gives it a blue color when first sprayed, then fades to clear as it cures. With this feature, users can easily see the amount of coverage they've achieved, and also have a visual indication of the curing cycle. 3M ACPS 11095 is not affected by ambient temperature and/or humidity, allowing it to be used in a variety of manufacturing conditions. Additional user-friendly features of 3M ACPS 11095 allow substrates to be easily repositioned without leaving fibers behind, simply by peeling back an individual layer and reapplying. If the coating dries before laying up of materials, an additional coating can be applied at a lower rate, which reactivates the previously applied coating. The product also enables manufacturers to use less than competitive brands. 3M ACPS 11095 has the ability to hold most types of reinforcement and to maintain the position of reinforcement for days without sagging. With typical usage, users will see little to no change in laminate shear properties. Available in aerosol cans as well as five-gallon and 55-gallon containers compatible with most traditional spray equipment, the product is also easy to clean up with most solvents. 3M ACPS 11095 is approved by Lloyd's Register and DNV. For more information about the new 3M ACPS 11095, contact 3M Technical/Application Support at 772-343-7300, or Customer Service/Ordering at 1-800-380-6553. About 3M3M captures the spark of new ideas and transforms them into thousands of ingenious products. Our culture of creative collaboration inspires a never-ending stream of powerful technologies that make life better. 3M is the innovation company that never stops inventing. With $30 billion in sales, 3M employs 84,000 people worldwide and has operations in more than 65 countries. For more information, visit www.3M.com or follow @3MNews on Twitter. 3M is a trademark of 3M Company. Karwoski & Courage Public RelationsMichael Gugala, 612-342-9604m.gugala@creativepr.comor3MConnie Thompson, 651-733-89143M Public Relations