The Globe and Mail

Go to the Globe and Mail homepage

Jump to main navigationJump to main content

Press release from Marketwire

Castillian Intersects 1.51 G Au/T Over 14.0 Metres in Connector Zone at Hope Brook

- Significant new near surface target area outlined 900 metres southwest of former mine

Thursday, January 17, 2013

Castillian Intersects 1.51 G Au/T Over 14.0 Metres in Connector Zone at Hope Brook07:00 EST Thursday, January 17, 2013TORONTO, ONTARIO--(Marketwire - Jan. 17, 2013) -Castillian Resources Corp. (TSX VENTURE:CT)(OTCQX:CTIIF) ("Castillian" or the "Company") has completed 5,951 meters of reconnaissance diamond drilling in 21 holes at its Hope Brook Gold Project in southwestern Newfoundland. All of the holes, except two that were lost, intersected the mineralized silicified zones as targeted from geological and geophysical data. The drilling intersected multiple zones of gold mineralization in a major new near surface target zone in the Mine Zone - 240 Connector Target ("Connector Zone"; see Figures 1 and 2), located approximately 900 metres (m) southwest of the former Hope Brook open pit. Table 1 lists significant results for all holes completed in the program (see press release dated December 11, 2012 for discussion of results of first four holes).Highlights from new drilling include:Major new near surface target zone within the Connector Zone and above the 240 Zone which extends along strike for approximately 800m to a depth of more than 300m;Hole HB12-100:1.51 grams gold per tonne (g Au/t) over 14.0m, including 2.03 g Au/t over 8.0m and 1.07 g Au/t over 18.1m core length, including 1.68 g Au/t over 5.5m core length within a 57 m wide silicified zone in the Connector Target; andHole HB12-101: 1.04 g Au/t over 8.5m core length, 1.44 g Au/t over 2.9m core length and 1.35 g Au/t over 5.6m core length within an overall 75m wide silicified zone 100m northeast of hole HB12-100. Dr. Bill Pearson, P.Geo., President and CEO of Castillian, commented: "This drill program was successful in outlining a major new near surface zone in the Connector Zone that has the potential to add significantly to our already strong mineral resource base. Our exploration team, support staff and drill contractor did a tremendous job completing the planned program in less than two months and on budget." Pearson continued: "We are currently completing interpretation of all of the new drilling data and planning the next drill program. The next program will focus on testing the new target zone and expanding existing resources, especially those that are potentially open pittable. In addition, our technical work has identified a number of areas near the current resource where there is potential to increase the overall grade of the resource." Mr. David Copeland, P.Geo., Chief Geologist added: "Drilling within the Connector Zone demonstrates continuity of the alteration and mineralizing systems along a shallow southwest plunge between the Hope Brook Deposit and the 240 Zone. The thickness of the silicified zones and encapsulating argillic alteration zone is similar to that seen in the former Hope Brook Mine and 240 Zone." Mr. Copeland continued: "A newly recognized fold system affects the rocks of the 240 and Connector Zone areas, the identification of which has been driven by drilling outside of the main Hope Brook Mine area. This fold system explains why the main silicified horizon southwest of the Hope Brook Mine does not come to surface and why shallow historical drilling within the area failed to intersect both of the zones. This interpretation is corroborated by geophysical data. Further structural modelling and geological work in progress is designed to provide a better understanding of where to target gold mineralization within this extensive fold system." The following provides a more specific description of the drilling completed in each of the target zones tested.240 Zone - Mine Zone Connector TargetThe Connector Zone was tested with a total of nine drill holes (3,279m; HB12-92 and 93 and HB12-100 to 106). Each of the holes that reached the intended target depth (seven of nine) within the Connector Zone intersected broad zones of silicified altered rocks with variable levels of gold mineralization.Hole HB12-100 encountered several intermittent zones of pyrite and chalcopyrite bearing grey siliceous alteration from 234.2 to 248.0 m, 288.0 to 319.1 m; and 349.9 to 407.2 m. The silicified zones assayed 1.07 g Au/t over 18.1m (core length), including 1.68 g Au/t over 5.5m (core length); and 1.52 g Au/t over 14.0m (core length), including 2.03 g Au/t over 8.0m (core length).Hole HB12-101 intersected buff-grey, pyrite and chalcopyrite - bearing silicification with intercalated mafic dykes from 329 to 403.8m (core length) with an 8.5m interval (core length) assaying 1.04 g Au/t. This interval bears many similarities to that described from historic drilling from the nearby 240 Zone and is being considered the eastern extension of the zone. Hole HB12-106 intersected multiple zones of buff to grey, pyrite bearing siliceous alteration zones from 243.9 to 262.1m, 282.9 to 299.4m, and 331.7 to 334.1m. The siliceous zones were host to multiple minor quartz-tourmaline veins with trace chalcopyrite. Significant assays include 1.82 g Au/t over 1.5m.Hole HB12-102 intersected a zone of light grey-buff, pyrite-bearing silicification from 262.2 to 281.9m and a zone of buff-grey, pyrite/chalcopyrite-bearing silicification from 151.4 to 183.7m.Holes HB12-104 and HB12-105 ended short of the Connector Zone mineralization at depths of 162m and 113m respectively due to poor ground and mechanical issues.Chetwynd and Chetwynd South ProspectsThe potential downdip extensions of the Chetwynd and Chetwynd South Prospects were tested by six reconnaissance drillholes (HB12-095 to 099 and HB12-103). Each of the drillholes intersected the targeted silicified alteration rocks with anomalous gold mineralization. Three drill holes (840m; HB12-095, 096, and 097) tested the Chetwynd South Prospect down dip mineralization encountered in historic holes CW-101, 102, 103, 039, and 098. Each of the drill holes intersected buff to grey, siliceous, pyrite and/or chalcopyrite-bearing mineralization. Quartz and tourmaline veining is prevalent and carries much of the gold mineralization. Anomalous gold values were encountered within the silicified zones and include 1.12 g Au/t over 1.5m core length in hole HB12-095 and 0.68 g Au/t over 1.5m in hole HB12-097.Two drill holes (602m; HB12-098 and HB12-099) tested for potential gold mineralization down-dip of historic drilling and surface exposure at the Chetwynd Prospect. Although each of the drill holes intersected several zones of intermittent buff and grey siliceous, pyrite-bearing, fragmental rocks, no significant gold values were obtained from the Chetwynd Prospect drilling.Chetwynd to 240 Connector TargetOne hole (353 metres; HB12-103) intersected several grey - buff, siliceous units from 177 - 181.5m, 192.3 - 195.5m, 198 - 202.1m and 229.5 - 230m. The relationship of these silicified zones with the Chetwynd Prospect and the 240-Zone mineralization is currently not clear and requires further investigation. No significant gold values were returned from this hole.NW Target AreaFive reconnaissance drill holes (714 m; HB12-107 to 111) tested the NW Target area with broad-spacing (75 to 125 m). Each of the drill holes intersected the targeted silicified alteration zones that locally contained disseminated chalcopyrite, pyrite and minor bornite. The best result was 1.16% Cu and 0.28 g Au/t over 1.3m in hole HB-12-109 and 0.68 g Au/t over 1.8m in hole HB 12-108.Table 1: Significant Diamond Drilling Results, Fall 2012 Program, Hope Brook Gold Project.Hole No.FromToCore TrueAuCu (%)(m)(m)Length (m)Width (m)(ppm)4960 StopeHB12-091*133.00138.705.702.591.100.00and206.30235.9029.6013.442.140.45incl.217.60232.2014.606.632.690.58incl.227.90232.204.301.955.241.47and253.40260.407.003.180.980.01HB12-094*106.30111.004.701.991.110.00and156.30169.0012.705.370.340.00and180.90220.0039.1016.521.900.12incl.185.00197.5012.505.283.950.07Mine Zone - 240 Connector ZoneHB12-092*314.40330.9016.5012.600.640.02incl.319.60322.002.401.801.660.04HB12-093*366.60382.0015.4010.100.460.04incl.370.40381.0010.606.950.520.04HB12-100349.9368. - 240 Connector ZoneHB12-103201.0203. ProspectHB12-098225.0230.25.24.4tr0.10HB12-099no significant valuesChetwynd SouthHB12-095223.5224. significant valuesHB12-097188.5190. Target ZoneHB12-10763.564.*Holes previously released see press release dated December 11, 2012 tr = traceTable 2: Collar Coordinates and Orientations of Drill Holes, Fall 2012 Program, Hope Brook. Hole No.TargetUTMMine GridElev.LengthAzDipEastingNorthingEastingNorthing(i)(m)(ii)(ii)HB12-0914960 Stope41791952878871152951985135279145-51HB12-092Connector Zone41775652873231107248295135367325-63HB12-093Connector Zone41775652873231107248295135446325-74HB12-0944960 Stope41794052879031155551995132223145-51HB12-095Chetwynd South4156315285792845347945055237325-47HB12-096Chetwynd South4156835285816850947835054320325-57HB12-097Chetwynd South4157525285860859147805058283325-57HB12-098Chetwynd4165925286508965148295045333325-53HB12-099Chetwynd4165215286429954748055046269325-51HB12-100Connector Zone41722952872601060450795069459145-51HB12-101Connector Zone41718052871551050450215066536145-52HB12-102Connector Zone41763052872281091448235123336325-65HB12-103Connector Zone4168795286625995347605023353325-59HB12-104*Connector Zone41740752874981088751735075162145-49HB12-105*Connector Zone41731152873141070250775073119145-49HB12-106Connector Zone41733252873151071950665073501147-55HB12-107NW Target4176755287755112535230508773145-43HB12-108NW Target4177275287796113195233509088145-43HB12-109NW Target41794752879111156652015131120325-45HB12-110NW Target41773652878541136052765104237145-49HB12-111NW Target41784452878141142651815131196325-45Called Off14Total5,951*Results for Holes HB12-104 and -105 were not reported as they were lost due to mechanical issues.SAMPLING, ASSAYING AND QUALITY CONTROL The core (NQ (47.6 mm) and BQTK (40.54 mm)) is logged, photographed and then sawn in half with one-half sent to the laboratory for analysis and the other half retained and stored on site. All core samples were prepared and assayed at ALS Minerals, with sample preparation done in Sudbury and analytical work done in North Vancouver. All locations of ALS Minerals are ISO 9001:2000 certified. The entire sample received is weighed and crushed to = 70% passing 2mm (10 mesh). A sample split of up to 1000g is then pulverized to = 85% passing 75 microns (200 mesh) to produce a homogenized sample. A 50g aliquot is used for fire assaying with an atomic absorption (AA) finish to determine gold concentration. Copper is initially analyzed using a four acid digestion ICP (inductively coupled plasma-atomic emission spectrometry) method. Any results for copper greater than 10,000 ppm are assayed further by a four acid digestion and "ore grade" ICP method. Internal quality control includes the use of blanks, duplicates and standards in every batch of samples. The Company also conducts internal check assaying using certified external reference standards and blanks. Regular external check assays are performed at a second certified Canadian commercial laboratory. Castillian also inserts external reference standards as well as blank granite drill core in each sample batch as a further external check.The Company also announces that it has extended the maturity date of the $250,000 bridge loan provided to the Company by Dr. Pearson to March 31, 2013 (see news release dated October 24, 2012).QUALIFIED PERSONS David Copeland, P.Geo., Chief Geologist supervised the diamond drilling program at Hope Brook and Dr. Chris Hale, P.Geo., supervised the geophysical work. Both are qualified persons as defined by NI 43-101. Mr. Copeland and Dr. Bill Pearson, P.Geo., President & CEO of Castillian, and qualified persons as defined by NI 43-101, have reviewed and approved the scientific and technical content of this news release. ABOUT CASTILLIANCastillian Resources Corp. is a Canadian mineral exploration company listed on the TSX Venture Exchange under the symbol "CT" and on the OTCQX International under the symbol "CTIIF". The Company has gold and base metal properties in Canada and South America. Castillian's flag ship property is the Hope Brook Gold Project located in southwestern Newfoundland, which has 2.4 million tonnes at 1.48 g Au/t for 590,000 ounces of NI 43-101 compliant indicated mineral resources and 8.2 million tonnes at 2.07 g Au/t for 548,000 ounces of inferred mineral resources (see technical report entitled "Updated Mineral Resource Estimate Technical Report, Hope Brook Gold Project, Newfoundland and Labrador, Canada", effective October 1, 2012). Castillian has outlined an extensive new Gold-in-Soil anomaly trend on its Canadian Creek property in the Yukon that is adjacent to Kaminak's Coffee property.Cautionary Note Regarding Forward-looking Information This press release contains "forward-looking information" within the meaning of applicable Canadian securities legislation. Forward-looking information includes, but is not limited to, statements regarding exploration prospects and timing of future exploration. Generally, forward-looking information can be identified by the use of forward-looking terminology such as "plans", "expects" or "does not expect", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates" or "does not anticipate", or "believes", or variations of such words and phrases or state that certain actions, events or results "may", "could", "would", "might" or "will be taken", "occur" or "be achieved". Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause the actual results, level of activity, performance or achievements of the Company to be materially different from those expressed or implied by such forward-looking information, including but not limited to: general business, economic, competitive, political and social uncertainties; the actual results of current exploration activities; future prices of mineral prices; failure of plant, equipment or processes to operate as anticipated; accidents, labour disputes and shortages and other risks of the mining industry. Although the Company has attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking information. The Company does not undertake to update any forward-looking information, except in accordance with applicable securities laws.Information Concerning Estimates of Indicated and Inferred Resources This news release uses the terms "indicated resources" and "inferred resources". Castillian advises investors that although these terms are recognized and required by Canadian regulations (under NI 43-101), the U.S. Securities and Exchange Commission does not recognize them. Investors are cautioned not to assume that any part or all of the mineral deposits in these categories will ever be converted into mineral reserves. In addition, inferred resources have a great amount of uncertainty as to their existence, and economic and legal feasibility. It cannot be assumed that all or any part of an inferred mineral resource will ever be upgraded to a higher category. Under Canadian rules, estimates of inferred mineral resources may not form the basis of feasibility or pre-feasibility studies, or economic studies except for preliminary economic assessments as defined under NI 43-101. Investors are cautioned not to assume that part or all of an inferred resource exists, or is economically or legally mineable.To view Figure 1: Hope Brook Longitundinal Section With Targets and Drill Holes Completed, please visit the following link: To view Figure 2: Hope Brook Geological Cross Section, please visit the following link: FURTHER INFORMATION PLEASE CONTACT: NEITHER TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS RESPONSIBILITY FOR THE ADEQUACY OR ACCURACY OF THIS RELEASE. Contact Information: Castillian ResourcesRob HopkinsInvestor Relations Manager416-861-5899rhopkins@castillian.caCastillian ResourcesBill PearsonPresident & CEO416-861-2968president@castillian.caCastillian Resources65 Queen Street West, Suite 815,Toronto, Ontario, CanadaM5H