The Globe and Mail

Go to the Globe and Mail homepage

Jump to main navigationJump to main content

Globe Investor

News Sources

Take control of your investments with the latest investing news and analysis

Press release from Marketwire

Energizer Resources Reports 43-101 Mineral Resource Estimate for its Green Giant, Madagascar, Graphite Property

Monday, December 03, 2012

Energizer Resources Reports 43-101 Mineral Resource Estimate for its Green Giant, Madagascar, Graphite Property10:07 EST Monday, December 03, 2012TORONTO, ONTARIO--(Marketwire - Dec. 3, 2012) - Energizer Resources Inc. (TSX:EGZ)(OTCBB:ENZR)(FRANKFURT:YE5) ("Energizer" or the "Company") is pleased to report the results of the mineral resource estimate for its Molo graphite deposit, located in Madagascar.The Molo deposit is located in the Green Giant Graphite project area, and is part of the joint venture (JV) property with Malagasy Minerals Limited in Madagascar. Energizer has a 75% ownership interest and is the operator of the project.The graphite mineral resource was prepared by Desmond Subramani, Pr.Sci.Nat. (400184/06) and John Hancox, Pr.Sci.Nat. (400224/04), independent Qualified Persons with Caracle Creek International Consulting (Pty) Ltd (CCIC) of Johannesburg, South Africa. A Technical Report in compliance with National Instrument (NI) 43-101 will be filed on SEDAR within 45 days of this release. CCIC has verified the information in this release.Mineral Resource EstimateThe mineral resource estimate is based on 48 drill holes (total 9551 metres) and 18 trenches (total 3637 metres) drilled by Energizer, at an average spacing of 100 metres along strike and 50 metres along dip. Three mineralised zones were interpreted and modelled for the resource calculation. A 'Low Grade' zone is based on the graphitic gneiss lithological boundary, within which an eastern and western 'High Grade' zone occurs. 'High Grade' zones are based on a 6.0% C threshold as a guideline. The block model was developed using Datamine Studio™ software. Blocks are 40 metres long, 10 metres wide and 10 metres high. Various cut-off grades were calculated for the model, and are listed in the table provided below. All grades are reported as percentage carbon (%C).Indicated resources totalling 84.04 Million tonnes (Mt) grading 6.36% C, above a 2% C cut-off grade. Inferred resources totalling 40.34Mt grading 6.29% C, above a 2% C cut-off grade. Mineralised zones in the resource estimation, start from the surface and continue to a maximum depth of 385 metres, with a total extension of 1630 metres. The zones remain open along strike and at depth. Two 'High Grade' zones occur on the western and eastern flanks of the Molo deposit, with a combined total Indicated resource of 60.17 Mt, grading 8.1% C, above a 4% C cut-off grade. Values displayed in the table are undiluted and "in-situ" as no economic parameters, such as mining, milling or metallurgy recovery have been applied to the values. As such, economic viability is yet to be established.Resource Table for Molo Deposit inclusive of 'Low' and 'High' grade zonesIndicated ResourcesInferred Resources% C Cut-offTonnesC%TonnesC%0.5084 695 8056.3240 725 8046.251.0084 592 3716.3340 679 5136.251.5084 387 7136.3440 562 6096.272.0084 041 9236.3640 339 4366.292.5083 056 9416.4139 563 7166.373.0081 050 0356.5038 329 8486.493.5078 191 6136.6236 153 2166.684.0074 044 1606.7833 500 3746.924.5067 070 2227.0330 391 7797.195.0056 835 2427.4427 197 4197.475.5048 607 3417.8223 810 7697.796.0043 402 3938.0720 627 2958.106.5039 357 8048.2618 990 5828.277.0034 860 2758.4617 052 5568.447.5028 488 2838.7214 778 0498.628.0021 195 7119.0510 740 9508.948.5014 975 8669.407 470 0189.269.009 500 6759.784 136 3089.709.505 596 14910.152 253 45510.0810.002 716 65910.601 132 42810.43Table 1 Molo resource summary table, as at December 2012.Interpolation ParametersOrdinary Kriging was used to interpolate the block model using two metre sample composites. Each zone had its search ellipse parameters to interpolate the grade. A primary search ellipse (based on the geo-statistical characteristics of the deposit model) of 70 metres along strike, 40 metres down dip and 10 metres across strike was applied. A single value of 2.36t/m3 density was used for all models. Capping values of 13% C and 15% C were applied to the assays for the eastern and western 'high' grade zones respectively.To report the resource and interpret the zones limits, a cut-off grade of 2% C and 4% C were applied to constrain the model for 'Low' and 'High' grade zones respectively.ClassificationClassification of the resource used the following criteria as guidelines:The geological interpretation and its relationship with mineralisation; Logging and sampling techniques; The quality and reliability of the geological database; The spatial coverage and spacing of drillholes; Estimation technique.Preliminary Economic Assessment UpdateDRA Mineral Projects ('DRA') of Johannesburg, South Africa continues to author the preliminary economic assessment report ("PEA). This report was scheduled for release in December, 2012, but has now been rescheduled for release in Q1 of 2013 due to re-engineering of the plant operating parameters. According to Craig Scherba, P.Geo, President and COO of Energizer, "The calculation of our graphite resource is a significant accomplishment for the Company, and impacts the next milestone for Energizer, which is the release of our PEA study. The original mine design parameters were based on an assumed head-grade of 6% C, and with the quantification by CCIC of significant tonnage at a much higher grade (9% vs 6% C), we believe a head-grade 40-60% higher than originally designed for is obtainable. Consequently, since less material will need to be processed to obtain the same volume of graphite flake, the capital and operating requirements for the mine should be significantly reduced in relation to the original design. DRA has therefore been authorized to begin redesigning the mine based on these new parameters.Qualified PersonDesmond Subramani, Pr.Sci.Nat. and John Hancox, Pr.Sci.Nat. of Caracle Creek International Consulting Inc. (Caracle Creek) of Johannesburg, South Africa, who are the Independent Qualified Persons under National Instrument 43-101 responsible for the resource estimate, have reviewed this release. Both Subramani and Hancox are the authors of the NI 43-101 Resource Report, which will be filed within 45 days of this news release.For more information, please visit our website at Harbour: This press release may contain forward-looking statements that may involve a number of risks and uncertainties. Actual events or results could differ materially from expectations and projections set out herein.Cautionary Statement: The above resource estimates were calculated in accordance with National Instrument 43-101 as required by Canadian securities regulatory authorities. For United States reporting purposes, Industry Guide 7 (under the Securities Exchange Act of 1934), as interpreted by the Staff of the SEC, applies different standards in order to classify mineralization as a reserve. Among other things, the terms "measured", "indicated" and "inferred" mineral resources are required pursuant to National Instrument 43-101, the U.S. Securities and Exchange Commission does not recognize such terms. Canadian standards differ significantly from the requirements of the U.S. Securities and Exchange Commission, and mineral resource information contained herein is not comparable to similar information regarding mineral reserves disclosed in accordance with the requirements of the U.S. Securities and Exchange Commission. Mineral resources are not mineral reserves and do not have demonstrated economic viability. This mineral resource estimate includes inferred resources that are normally considered too speculative geologically to have economic considerations applied to them that would enable them to be categorized as mineral reserves. There is also no certainty that the inferred mineral resource will be converted to the measured and indicated mineral resource categories through further drilling, or into a mineral reserve once economic considerations are applied.U.S. investors should understand that "inferred" mineral resources have a great amount of uncertainty as to their existence and great uncertainty as to their economic and legal feasibility. In addition, investors are cautioned not to assume that any part or all of the Company's mineral resources constitute or will be converted into reserves.FOR FURTHER INFORMATION PLEASE CONTACT: Contact Information: Energizer Resources Inc.Brent NykoliationSenior Vice President, Corporate DevelopmentToll Free: 800.818.5442 or 416.364.4911bnykoliation@energizerresources.comEnergizer Resources Inc.Craig ScherbaPresident and COOToll Free: 800.818.5442 or