The last two of eight prototypes for President Donald Trump's proposed border wall took shape Thursday at a construction site in San Diego.
The prototypes form a tightly packed row of imposing concrete and metal panels, including one with sharp metal edges on top. Another has a surface resembling an expensive brick driveway.
Companies have until Oct. 26 to finish the models but Border Patrol spokesman Theron Francisco said the last two came into profile, with crews installing a corrugated metal surface on the eighth model on a dirt lot just a few steps from homes in Tijuana, Mexico.
As the crews worked, three men and two women from Nepal, ages 19 to 30, jumped a short rusted fence from Tijuana into the construction site and were immediately stopped by agents on horseback.
Francisco said there have been four or five other illegal crossing attempts at the site since work began Sept. 26.
The models, which cost the government up to $500,000 each, were spaced 30 feet apart. Slopes, thickness and curves vary. One has two shades of blue with white trim. The others are grey, tan or brown — in sync with the desert.
Bidding guidelines call for the prototypes to stand between 18 and 30 feet high and be able to withstand at least an hour of punishment from a sledgehammer, pickaxe, torch, chisel or battery-operated tools.
Features also should prevent the use of climbing aids such as grappling hooks, and the segments must be "esthetically pleasing" when viewed from the U.S. side.
The administration hasn't said how many winners it will pick or whether Trump will weigh in himself.
Crews work on a wall prototype near the border with Tijuana, Mexico, Thursday, Oct. 19, 2017, in San Diego.
There is currently 1,052 kilometres of single-layer fence on the 3,143-kilometre border, plus 82 kilometres of double- and triple-layer fence.
"I'm sure they will engage in a lot of tests against these structures to see how they function with different challenges," U.S. Rep. Bob Goodlatte, a Virginia Republican who chairs the House Judiciary Committee, said Tuesday after touring the construction site.
Trump has asked Congress for $1.6 billion to replace 22.4 kilometres of wall in San Diego and build 96 kilometres in Texas' Rio Grande Valley, the busiest corridor for illegal crossings.
Here's a rundown of companies building prototypes, their headquarters and value of their contract. Two are making one concrete prototype and another using other materials.
Cadell Construction Co.
Montgomery, Alabama ($344,000 for concrete wall, $320,000 for other wall)
A border wall prototype by Caddell Construction.
Its tan concrete wall is thick at the bottom and narrows considerably toward the pointed top. The other, also tan, has metal poles on the bottom, a metal plate in the middle, and concrete block on top.
The second of two proposals from Caddell Construction.
Gregory Bull/AP
The general construction company founded in 1983 says its projects include U.S. embassies in Beijing and Kabul, Afghanistan, terminals at Houston's George Bush International Airport and renovations to the Denver Mint.
W.G. Yates & Sons Construction Co.
Philadelphia, Mississippi ($453,548 for concrete wall, $458,103 for other wall)
A concrete border wall prototype by W.G. Yates & Sons Construction Company.
Its models are a darker brown than other prototypes and topped by round beams. Its concrete panel has a plain face; its metal one has a corrugated surface.
W.G. Yates & Sons’s metal border wall prototype.
The 53-year-old company has worked in a wide range of projects, including a Toyota plant in Blue Springs, Mississippi, a county jail in Olmito, Texas, a marine terminal in Jacksonville, Florida, and a power plant near Panama City, Florida.
Two companies are building concrete walls.
Fisher Sand & Gravel Co.
Tempe, Arizona ($365,000 contract)
A border wall prototype by Fisher San & Gravel Co.
It's the only prototype to be built entirely on site — as opposed to being hauled in. Its tan surface gradually narrows toward the top, like a long triangle.
Part of conglomerate Fisher Industries, the company produces sand, gravel and other products for roads, dams and large public works projects. The company is active is 12 western states.
Texas Sterling Construction Co.
Houston, Texas ($470,000 contract)
A border wall prototype by Texas Sterling Construction Company.
The grey surface of the U.S. side is stamped with patterns of different-sized bricks, like a driveway or sidewalk at an upscale home. There is a steel plate on top with prongs that feature at three metal spikes, resembling an agave plant.
Parent company Sterling Construction Co., founded in 1991, specializes in water and transportation projects, including highways, bridges, ports, light rail, wastewater and storm drainage systems. It is active in Utah, Texas, Nevada, Colorado, Arizona, California and Hawaii.
Two companies were selected to build walls made of materials other than concrete.
KWR Construction Inc.
Sierra Vista, Arizona ($486, 411 contract)
A border wall prototype by KWR Construction.
Its grey metal columns are topped with a large metal plate. The small, Hispanic-owned company counts the Homeland Security, Defence and Interior departments among its largest customers.
ELTA North America Inc.
Annapolis Junction, Maryland ($406,319 contract)
A border wall prototype by ELTA North America Inc.
Its solid metal wall features six light blue squares with white trim on the bottom third, topped by dark blue beams and metal plates.
ELTA is a large Israeli defence contractor owned by state-run Israel Aerospace Industries. The company, which makes radar and other gear, opened its new U.S. headquarters in Maryland in May.